|
|
 |
| Tripp Lite SmartPro Tower 1050SLT UPS - 1050VA/670W - 6 Minute Full Load - 8 x NEMA 5-15R |
 |
Product ID
| Mfg: |
Tripp Lite |
| Mfg. Part #: |
SMART1050SLT |
|
|
|
Product Overview- 1050VA/670W
- 6 Minute Full Load
- 8 x NEMA 5-15R
1050VA line-interactive tower UPS system for server, networking and telecommunications equipment. Upright tower form factor. Offers sine wave 100V, 110V or 120V nominal output in both AC and battery modes. Switches to battery-derived AC output during power failures and extreme voltage variations. Line-interactive automatic voltage regulation (AVR) provides voltage boost during brownouts and voltage cut during overvoltages to maintain regulated 100V, 110V or 120V nominal output over an input voltage range of 95-145V. Features NEMA 5-15P input plug and 8 NEMA 5-15R output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Features 3-stage metered current monitoring and battery charge status LEDs. Dataline surge suppression for dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Field replaceable, hot-swappable internal batteries and exte | Manufacturer | Tripp Lite | | Manufacturer Part Number | SMART1050SLT | | Manufacturer Website Address | www.tripplite.com | | Product Line | SmartPro | | Product Series | Tower | | Product Name | SmartPro Tower 1050SLT UPS | | Marketing Information | 1050VA line-interactive tower UPS system for server, networking and telecommunications equipment. Upright tower form factor. Offers sine wave 100V, 110V or 120V nominal output in both AC and battery modes. Switches to battery-derived AC output during power failures and extreme voltage variations. Line-interactive automatic voltage regulation (AVR) provides voltage boost during brownouts and voltage cut during overvoltages to maintain regulated 100V, 110V or 120V nominal output over an input voltage range of 95-145V. Features NEMA 5-15P input plug and 8 NEMA 5-15R output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Features 3-stage metered current monitoring and battery charge status LEDs. Dataline surge suppression for dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Field replaceable, hot-swappable internal batteries and exte | | Product Type | Line-interactive UPS | | Plug/Connector Type | NEMA 5-15P | | Receptacles | 8 x NEMA 5-15R | | Interfaces/Ports | 1 x DB-9 | | Interfaces/Ports | 1 x USB | | Network Management | SNMP Manageable Optional | | Batteries | Sealed Lead Acid User-replaceable Hot-swappable | | Backup/Run Time | 0.10 Hour 1.1 kW Full Load | | Backup/Run Time | 0.30 Hour 525 W Half Load | | Battery Recharge Time | 4 Hour | | Load Capacity | 1.05 kVA/670 W | | Input Voltage | 110 V AC | | Input Voltage Range | 120 V AC Single-phase | | Output Voltage | 120 V AC Single-phase | | Form Factor | Tower | | Dimensions | 8.75" Height x 6.75" Width x 16.75" Depth | | Weight (Approximate) | 43 lb | | Package Contents | SmartPro Tower 1050SLT UPSSMART1050SLT UPS SystemPowerAlert Software CDUSB and serial cablingOwner's manual with warranty information | | Standard Warranty | 2 Year |
| General Information | | Manufacturer | Tripp Lite | | Manufacturer Part Number | SMART1050SLT | | Manufacturer Website Address | www.tripplite.com | | Brand Name | Tripp Lite | | Product Line | SmartPro | | Product Series | Tower | | Product Name | SmartPro Tower 1050SLT UPS | | Marketing Information | 1050VA line-interactive tower UPS system for server, networking and telecommunications equipment. Upright tower form factor. Offers sine wave 100V, 110V or 120V nominal output in both AC and battery modes. Switches to battery-derived AC output during power failures and extreme voltage variations. Line-interactive automatic voltage regulation (AVR) provides voltage boost during brownouts and voltage cut during overvoltages to maintain regulated 100V, 110V or 120V nominal output over an input voltage range of 95-145V. Features NEMA 5-15P input plug and 8 NEMA 5-15R output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Features 3-stage metered current monitoring and battery charge status LEDs. Dataline surge suppression for dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Field replaceable, hot-swappable internal batteries and exte | | Product Type | Line-interactive UPS | | Technical Information | | Plug/Connector Type | NEMA 5-15P | | Receptacles | 8 x NEMA 5-15R | | Power Description | | Load Capacity | 1.05 kVA/670 W | | Input Voltage | 110 V AC | | Input Voltage Range | 120 V AC Single-phase | | Output Voltage | 120 V AC Single-phase | | Frequency | 60 Hz | | Waveform Type | Sine Wave | | Filtering | EMI / RFI | | Management | | Network Management | SNMP Manageable Optional | | Overload Protection | 15A input breaker | | Alarm | On Battery | | Alarm | Overload | | Controls/Indicators | | Status Indicators | Includes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. Also includes 1 rear panel site wiring fault indicator. | | Interfaces/Ports | | Interfaces/Ports | 1 x DB-9 | | Interfaces/Ports | 1 x USB | | Modular Slots | 1 x Communications Slot | | Battery Information | | Batteries | Sealed Lead Acid User-replaceable Hot-swappable | | Backup/Run Time | 0.30 Hour 525 W Half Load | | Backup/Run Time | 0.10 Hour 1.1 kW Full Load | | Battery Life | 26297.44 Hour to 52594.88 Hour | | Battery Recharge Time | 4 Hour | | Environmental Conditions | | Temperature | 32°F (0°C) to 104°F (40°C) Operating | | Humidity | 0 to 95% Non-condensing Relative Humidity | | Physical Characteristics | | Form Factor | Tower | | Power Cord/Cable | 72" | | Dimensions | 8.75" Height x 6.75" Width x 16.75" Depth | | Weight (Approximate) | 43 lb | | Miscellaneous | | Package Contents | SmartPro Tower 1050SLT UPSSMART1050SLT UPS SystemPowerAlert Software CDUSB and serial cablingOwner's manual with warranty information | | Additional Information | SMART1050SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression 1050VA / 670 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices Large internal batteries offer runtimes of 18 minutes at half load (525VA / 335 watts) and 6 minutes at full load (1050VA / 670 watts) Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110, 120 or 127V nominal output over an input voltage range of 91-145V Includes 8 fully-protected NEMA 5-15R output receptacles arranged in a single load bank that can be powered off and back on again via software interface PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands Offers simultaneous monitoring of up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise managment software is also available for select opportunities Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) 15 LEDs offer continuous detailed status information of UPS operating parameters and site power quality Hot-swappable batteries allow on-site battery replacement without powering off connected equipment UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Emissions) Listed 2 year warranty with up to $250,000 connected equipment insurance | | System Requirements | TYPICAL APPLICATIONS: Ideal for the protection of network fileservers, internetworking gear, switches, hubs, POS terminals, VOIP telephony and traditional PBX switching systems, back office computer systems, ATM machines, informational/internet/commerce kiosks, remote unattended servers, web servers, database servers, security systems, card readers, security cameras and other sensitive electronic devices requiring clean, continuously-regulated output power. | | Certifications & Standards | UL1778 (USA), cUL (Canada), FCC Class B (emissions), IEC 1000-4-2 Level 3 (Electrostatic Discharge), IEC 1000-4-4 Level 2 (Fast Transient / Burst), IEC 1000-4-5 Level 3 (Lightning Surge), Conforms to IEEE 587 / ANSI C62.41 specifications | | Warranty | | Standard Warranty | 2 Year |
|
|
|
|
|
View Cart
